Specifications

405-00022-00VA6x User’s Reference
64 Rev 06; 7 April 2011
Logic Thresholds
Three threshold controls are provided to control the various inputs. These thresholds are serially
programmed using the VA-Genie Camera Setup utility. Threshold values you set are retained in
EEPROM after power is disconnected, and used when power is restored.
IPD DCI-100 Threshold Control Assignments
Threshold 1 Camera 1
Threshold 2 Camera 2
Threshold 3 Serially readable inputs
Pin 1
Pin 2
Pin 20
Input
Connector
Output
Connector
Pin 1
Pin 2
Pin 20
Power Input
for DCI-100
and Cameras
Figure 39. DCI-100 Connectors