User`s manual

Preliminary
Genie Monochrome Series-GigE Vision Camera Genie Monochrome Series Overview • 9
Supported Industry Standards
Genie cameras are 100% compliant with the GigE Vision 1.0
specification which defines the communication interface protocol
used by any GigE Vision device. For more information see:
http://www.machinevisiononline.org/public/articles/index.cfm?cat=167
Genie cameras implement a superset of the GenICam™
specification which defines device capabilities. This description
takes the form of an XML device description file respecting the
syntax defined by the GenApi module of the GenICam™
specification. For more information see
www.genicam.org.
Genie Sensor Overview
Each sensor description below provides a specification table and response graphic. The graph
describes the sensor response to different wavelengths of light (excluding lens and light source
characteristics). Visible light spans wavelengths between about 390 - 780 nanometers. Wavelengths
below 390 nm is termed ultra-violet while those above 780 nm. is termed infra-red. The peak response
is around 500 nanometers, corresponding to a shade of blue-green.