User`s manual

Preliminary
Genie Monochrome Series-GigE Vision Camera Operational Reference • 31
Camera Information via Sapera LT or GenICam Applications
Genie Sapera parameters for Camera and Sensor Information:
Interface = {GigE Vision = 0}
DeviceVendorName = “DALSA”
DeviceModelName = “Genie M640” for Genie M640
DeviceVersion = String representing the version of the camera
FirmwareVersion = String representing the version of the camera firmware
DeviceID = String representing the camera serial number
MACAddress = String representing the camera MAC address
DeviceUserID = String representing the user-define name for the camera
DeviceMaxThroughput = Maximum throughput of image streaming in bytes/sec.
DeviceScanType = {Areascan = 0}
ColorType = {Monochrome Sensor = 0}
SensorWidth = Width of the sensor in pixels
SensorHeight = Height of the sensor in lines
PixelSize = Number of bits per pixel
In CamExpert, these parameters are visible under “Camera Information” and “Sensor”
tabs.