User`s manual

Preliminary
Genie Monochrome Series-GigE Vision Camera Operational Reference • 39
CamExpert Image Buffer and ROI Parameters
CamExpert provides controls to configure the acquisition image buffer and ROI via the Image Buffer
and ROI Parameters tab. The image buffer can be easily cropped as desired. Below is the CamExpert
dialog and parameter descriptions follow.
Parameter Description
Pixel Format For the Genie Monochrome series, the image buffer format is always Monochrome
8-bit.
Width (in Pixels) Displays the image buffer width (X axis), in pixels.
Height (in Pixels) Displays the image buffer height (Y axis), in pixels.
OffsetX (in Pixels) Specifies the offset in X, from the left of the image, when using an ROI. The image
buffer width is automatically adjusted to compensate for this offset.
OffsetY (in Lines) Specifies the offset in Y, from the top of the image, when using an ROI. The image
buffer height is automatically adjusted to compensate for this offset.
Note: When operating in binning mode, the resolution is halved and the coordinate system is scaled
accordingly. For instance, an OffsetX of 20 pixels at nominal resolution is equivalent to an OffsetX of
10 pixels with horizontal binning enabled.