User`s manual

Preliminary
70 • Operational Reference Genie Monochrome Series-GigE Vision Camera
Power-upConfig RW ENUM Factory Default = 0
Camera Configuration 1 = 1
SaveCameraConfigurationSelector RW ENUM Camera Configuration 1 = 1
LoadCameraConfigurationSelector RW ENUM Factory Default = 0
Camera Configuration 1 = 1
NetworkConfigurationMode RW ENUM Automatic = 0
Manual = 1
Feature Type INT32
The feature list for type INT32 has an additional column 'Exponent' which defines the feature's native
unit. This exponent value is used as a unit multiplier so that the feature value is expressed as an
integer, not a decimal number.
• As an example from the following table, the Genie frame rate is 60000 with an exponent of 3.
Therefore the frame rate native unit is mHz. The current value shown – 60000 mHz, is actually
60.000 Hz.
Feature Name Access Type Exponent Sample Value
DeviceMaxThroughput RO INT32 EXP10: 0 18432000
SensorWidth RO INT32 EXP10: 0 640
SensorHeight RO INT32 EXP10: 0 480
FrameRate (mHz) RW INT32 EXP10: 3 60000
BlackLevel RW INT32 EXP10: 0 0
Gain RW INT32 EXP10: 1 0
ExposureTime (μS) RW INT32 EXP10: 6 16384
TriggerDelayToIntegration (μS) RW INT32 EXP10: 6 0
LUTNumberEntries RO INT32 EXP10: 0 256
DebounceInput_1 (μS) RW INT32 EXP10: 6 10
DebounceInput_2 (μS) RW INT32 EXP10: 6 10
PulseDelayOutput_1 (μS) RW INT32 EXP10: 6 0
PulseDurationOutput_1 (μS) RW INT32 EXP10: 6 0
PulseDelayOutput_2 (μS) RW INT32 EXP10: 6 0
PulseDurationOutput_2 (μS) RW INT32 EXP10: 6 0
Width RW INT32 EXP10: 0 640
Height RW INT32 EXP10: 0 480
OffsetX RW INT32 EXP10: 0 0
OffsetY RW INT32 EXP10: 0 0