User`s manual

Preliminary
Genie Monochrome Series-GigE Vision Camera Sapera CamExpert Guide • 87
• Output pane: Displays messages from CamExpert or the device driver.
• Video Status bar: Located on the lower right of the CamExpert window, color coded camera
signal status information is displayed. Green for valid signals detected, red for missing or
incorrect signals. Video status items may differ with different devices.
Most of these panes can be hidden via the menu bar view command. Typically after selecting an
acquisition device and loading a camera file, the Device and Camera windows can be closed.
CamExpert LUT Controls
The Lookup Table dialog allows you to configure the LUT if it is available on the device. Genie
monochrome cameras support an 8-bit LUT. To open this dialog, use the Pre-Processing > Lookup
Table > Setting menu command. Note that you must first enable the Lookup Table, otherwise the
Setting command will be grayed-out.
To select the type of LUT to use, click the LUT Mode Value field; a drop-down list box displays the
available modes. The Lookup Table dialog displays a graph of the input and output values for the
selected LUT. These are CamExpert common examples for LUT operations. A Sapera application can
program the Genie LUT for any required LUT operation. See "
Lookup Table (LUT)" on page 56 for
Genie LUT support.