User`s manual

Preliminary
Genie Monochrome Series-GigE Vision Camera Technical Specifications • 89
Technical Specifications
Mechanical Specifications
• For information on Genie connectors see "Rear View – Connectors" on page 90.
• For information on Genie lens requirements see "
Front View – Lens Mount" on page 89 and
"
Optical Considerations" on page 95.
• For information on Genie case mounting dimensions see "
Bottom View – Camera Mounting"
on page 89.
Front View – Lens Mount
The following figure shows lens mount view and associated dimensions. See section "Optical
Considerations" on page 95 for information to choosing a lens for the Genie camera.
44.00 mm
29.00 mm
C-mount:
1" diameter, 32 threads per inch.
Lens flange focal distance = 17.52 mm
Thread depth ~ 13.5 mm
Genie - front view
Bottom View – Camera Mounting
The following figure shows the location of the four mounting screw holes and the overall camera
length (without the Hirose 12-pin connector).