User`s manual

Genie Monochrome Series-GigE Vision Camera Operational Reference 77
LoadCameraConfigurationSelector RW N.conn ENUM Factory Default = 0
Camera Configuration 1 = 1
IPConfigurationMode RW N.acq ENUM DHCP/LLA mode = 0
Persistent IP mode = 1
NetworkConfigurationMode RW N.conn ENUM Automatic = 0
Manual = 1
Feature Type INT32
The feature list for type INT32 has an additional column 'Exponent' which defines the feature's native unit. This
exponent value is used as a unit multiplier so that the feature value is expressed as an integer, not a decimal number.
As an example from the following table, the Genie frame rate is 60000 with an exponent of 3. Therefore the
frame rate native unit is mHz. The current value shown – 60000 mHz, is actually 60.000 Hz.
Feature Name
(type INT32)
Access Write
mode
Exponent Sample
Value
Boundaries
DeviceMaxThroughput RO Invalid EXP10: 0 18432000
min=0, max=0, inc=0
SensorWidth RO Invalid EXP10: 0 640
1 to sensor width
SensorHeight RO Invalid EXP10: 0 480
1 to sensor height
FrameRate (mHz) RW Always EXP10: 3 60000
100 to camera max
BlackLevel RW Always EXP10: 0 0
min= -128, max=127, inc=1
Gain RW Always EXP10: 1 0
min= -60, max=120, inc=1
ExposureTime (μS) RW Always EXP10: 6 16384
min=22, max=16000000, inc=1
TriggerDelayToIntegration (μS) RW N.acq EXP10: 6 0
min=0, max=xxx, inc=1
FramesPerTrigger RW Always EXP10: 0 1
min=1, max=32767, inc=1
LUTNumberEntries RO Invalid EXP10: 0 256
min=1, max=65536, inc=1
DebounceInput_1 (μS) RW Always EXP10: 6 10
min=1, max=255, inc=1
DebounceInput_2 (μS) RW Always EXP10: 6 10
min=1, max=255, inc=1
PulseDelayOutput_1 (μS) RW Always EXP10: 6 0
min=0, max=16777215, inc=1
PulseDurationOutput_1 (μS) RW Always EXP10: 6 0
min=100, max=16777215, inc=1
PulseDelayOutput_2 (μS) RW Always EXP10: 6 0
min=0, max=16777215, inc=1
PulseDurationOutput_2 (μS) RW Always EXP10: 6 0
min=100, max=16777215, inc=1
Width RW N.conn EXP10: 0 640
min=8, max=sensor width, inc=4
Height RW N.conn EXP10: 0 480
min=1, max=sensor height,
inc=1
OffsetX RW N.conn EXP10: 0 0
min=0, max=sensorwidth-8,
inc=4
OffsetY RW N.conn EXP10: 0 0
min=0, max=sensorheight-1,
inc=1
SaperaBufferFormat RO Invalid EXP10: 0 16844800
NA
PixelSize RO Invalid EXP10: 0 8
NA
InterPacketDelay (μS) RW N.acq EXP10: 6 0
min=0, max=65535, inc=1
PacketSize RW N.conn EXP10: 0 1500
min=576, max=9152, inc=4
HeartbeatTimeout (mS) RW Always EXP10: 3 500
min=500, max=65000, inc=1
MaximumPacketResend RW N.conn EXP10: 1 100
min=0, max=1000, inc=1
InterPacketTimeout RW N.conn EXP10: 6 10000
min=1000, max=655350, inc=1