User`s manual

16 • Part I: PC2-CamLink Board PC2-CamLink User's Manual
• The ‘Select Components’ window is displayed (see above screen shot). If you do not see PC2-
CamLink in the list, select Next to display more boards. Check PC2-CamLink and select Next.
Note that only the support, configuration files and examples for the board(s) chosen get copied to
your hard drive.
• The ‘Select Program Folder’ window is displayed. You can either retain the default program
folder or create a new one. Select Next for the installation to begin.
• A window appears asking if you want Acrobat Reader to view and print manuals installed with
the ‘Imaging Studio’ CD-ROM. Select Yes if you do not already have Acrobat Reader installed in
your system.
• Select Yes or No after the window appears asking to view readme files.
• The ‘Service Pack Update Check’ window is displayed. This allows you to check for an IFC
service pack update via the DALSA web site. Note that you need an active Internet connection.
Select Yes if you want to check for an update. It is possible to check later for a service pack
update through a shortcut in the IFC program group.
• The ‘Setup Complete’ window appears and asks whether you want to restart the computer now or
at a later time. Choose desired option and select Finish. Note that the computer must be restarted
for the drivers to take effect.