User`s manual

66 • Part I: PC2-CamLink Board PC2-CamLink User's Manual

• 8K pixel x 8K # of lines for linescan

• Variable frame length for linescan (level control or 2 pulse controls)

PCI Transfer

• Up to 100MB/second sustained

Connectors

• One MDR-26 for Camera Link™

• One DB-15 for trigger, strobe and +12V/+5V power (available on PCI

bracket)

• One 26-pin header for Parallel I/O (flat cable to second slot)

I/O

• 19 general-purpose I/O pins, TTL level (8 input, 8 output, 2 strobes, 1

interrupt) with 2 soft-fused +5V power pins

• One RS-232C serial port, mapped as regular Windows COM PORT

Miscellaneous

• 2 Visual Status LED indicators: Acquisition and Trigger

Software

• Supported by Sapera LT, Sapera Processing, IFC™, MVTools, Sherlock,

WiT, VixN, Camera Configurator, Windows XP, Windows Vista, and Windows

• Application development using Microsoft® Visual C/C++ DLLs or Visual

Basic

System

Requirements

• Intel® Pentium III® class CPU, 128MB system memory, 30MB free hard-

drive space

Dimensions

• 6.675” length x 4.2” height (standard PCI half-slot card)

Camera Power

• 5V (up to 1.5A) and 12V (up to 0.5A) taken from PCI connector with auto-

reset fuse

• Option to plug floppy power cable for more current (up to 1.5A)

Temperature

○

C (32

○

F) to 55

○

C (131

○

Relative Humidity: 5% up to 95% (non-condensing)