User`s manual

PC2-CamLink User's Manual Part I: PC2-CamLink Board • 5
The PC2-CamLink
The PC2-CamLink is a half slot frame grabber that grabs images from a single base digital Camera
Link™ camera to host memory for processing. The board was designed for cost-effective
performance. Both linescan and area scan cameras are supported. Up to two channels are supported.
Note that RGB is not supported.
Components & Part Numbers
The following table lists the components and part numbers for the PC2-CamLink:
Item Part Number
Board
PC2-CamLink OC-PC20-C0000
Cables & Accessories
Camera Link™ Video Input Cable (optional product):
1 meter OC-COMC-CLNK0
2 meter OC-COMC-CLNK6
Optional Cable
Floppy power connector* (connects to J14) OC-COMC-POW03
Parallel I/O connector to female D-sub 25 bracket assembly (connects to J8) 4816
Documentation
PC2-CamLink User’s manual OC-PC2M-CUM00
IFC-SDK Software manual 403-00004-00
Camera Configurator® User's manual 405-00006-00
*The floppy power connector can be ordered by contacting DALSA. See “DALSA Contact
Information
” (on page 121) for further information.