User`s manual

Piranha4 4K and 2K Dual Line Monochrome CMOS Camera User's Manual 77
Teledyne DALSA 03-032-20176-02
Features listed in the description table but tagged as Invisible are usually for Teledyne DALSA or third
party software usage—not typically needed by end user applications.
Acquisition and Transfer Control Feature Descriptions
The following table describes these parameters along with their view attribute and minimum camera
firmware version required. Additionally the firmware column will indicate which parameter is a
member of the DALSA Features Naming Convention (DFNC), verses the GenICam Standard Features
Naming Convention (SFNC not shown).
Display Name
Feature
Description
Device
Version
& View
Device
Registers
Streaming Start
DeviceRegistersStreamingStart
Announces the start of registers streaming
without immediate checking for
consistency.
1.00
Beginner
DFNC
Device
Registers
Streaming End
DeviceRegistersStreamingEnd
Announces end of registers streaming and
performs validation for registers
consistency before activating them.
1.00
Beginner
DFNC
Check Stream
Validity
DeviceRegistersCheck
Press to check the validity of the current
register set.
1.00
Beginner
DFNC
Registers Valid
DeviceRegistersValid
States if the current register set is valid
and consistent.
1.00
Beginner
DFNC