User`s manual

86 Piranha4 4K and 2K Dual Line Monochrome CMOS Camera User's Manual
03-032-20176-02 Teledyne DALSA
Disabling the Esc Key for Direct Access to ASCII Commands
By default the Esc key is enabled and an Esc key sequence has to be issued in order to access the ASCII
commands. Using the DEK 1 command the need to issue an Esc key is disabled and access to the ASCII
commands are available immediately upon camera boot up. Note: access to GENCP is no longer
available with the Esc key disabled unless a DEK 0 command is issued and the camera re-booted.