User`s manual

Piranha4 4K and 2K Dual Line Monochrome CMOS Camera User's Manual 95
Teledyne DALSA 03-032-20176-02
Full Name
Internal Line Rate
Mnemonic
SSF
Argument(s)
Line rate
1 to 100, 000 [Hz] (TDI mode)
1 to 200, 000[Hz}] (Area mode)
Description
Set internal line rate in Hz
Notes
 Line time > ( Exposure time + 1, 000 ns )
Full Name
Gain
Mnemonic
SSG
Argument(s)
Selector
0. System Gain
1. Bottom Line
2. Top Line
Gain
1.0 to 10.0
Description
Set gain as a single value multiplied by all pixels.
Notes
 When not in multiexposure mode System gain in only available
 Floating point number: 1.0 to 10.0.
 Note that gain value must be preceded by an ―f‖ (e.g. ssg 0 f1.5)
Full Name
Set TDI Stages
Mnemonic
STG
Argument(s)
Selector
TDI stage
1. Single line mode (lower sensitivity).
2. TDI mode (higher sensitivity)
Description
Notes
 In single line mode the camera must be internal direction control
 TDI mode: a pair of lines summed with suitable delay
Full Name
External Trigger
Mnemonic
STM
Argument(s)
Mode
0. Internal
1. External
Description
Set trigger mode
Notes
 In internal mode line rate is controlled by SSF command
 In external mode readout starts on falling edge of CC1 signal and is available
only when STM = 1 (external trigger on)
 Exposure time equals high time of EXSYNC on signal on CC1