User`s manual

Spyder 3 GigE User Manual
03-032-10158-09 DALSA
12
Sensor Shift Direction
When in high sensitivity mode, you can select either forward or reverse CCD shift
direction. This accommodates object direction change on a web and allows you to mount
the camera “upside down”.
Figure 6: Object Movement and Camera Direction Example using an Inverting Lens
Directionof
ObjectMovement
Camerashouldoperatein
ReverseShif tDirection
scd1
Directionof
ObjectMovement
Camerashouldoperatein
ForwardShiftDirection
scd0
Note: You can control the CCD shift direction through the serial interface. Use the
software command scd to determine whether the direction control is set via software
control or via the Camera Link control signal on CC3. Refer to the CCD Shift Direction
section of this manual, page
57, for details.