User`s manual

Spyder 3 GigE User’s Manual
DALSA 03-032-10158-09
19
2.1 Installation Overview
2
Install QuickCam GUI.
Spyder3 GigE CDInsert the into your CD-
ROM and follow the online instructions to
install the QuickCam GUI.
1
Install Ethernet card.
Following the manufacturer’s instructions,
install an Ethernet card. For Gigabit
performance, you must install an Intel
PRO/1000 Ethernet card.
You will install the appropriate
QuickCam driver in step 3.
Do not install the manufacturer’s
driver.
!
3
1. the Driver Installation Tool
Tools Launch Driver Installation Tool
Open . Start
Programs—DALSA QuickCam— —
Intel PRO/1000 adapter
Pro 1000 Adapters
Install High Performance IP Device Driver
NOT Intel PRO/1000 adapter
Universal IP Filter Driver Install Filter Driver…
On the Windows task bar click , point to
.
2. If you are using an :
a) On the tab, right-click on an Intel PRO/1000 network
interface card adapter with no installed driver (i.e. when the Device Class is
Ethernet Controller).
The following context menu appears:
b) Choose to install the QuickCam
High Performance IP Device Driver.
If you are using an :
a) On the tab, click, This button
installs the QuickCam Universal IP Filter Driver on ALL network adapters
installed on the system that are using a network driver. This excludes
PRO/1000 adapters on which the QuickCam High-Performance Driver has
been installed.
Install QuickCam driver.