User`s manual

Spyder 3 GigE User Manual
03-032-10158-09 DALSA
20
Connect Ethernet cable.
Connect Cat 5 or Cat 6 cable from camera
to computer Ethernet jack.
5
Connect power cable.
Connect power cable from camera to +12
V to +15 V power supply.
4
GPIO Connector
If using an external sync, external direction
control or any other external signals,
connect the GPIO.
6
4
Open QuickCam.
Programs—DALSA
QuickCam—DALSA QuickCam
On the Windows task bar click , point Start
to
.
7
Confirm or enter your IP Address.
In the dialog box, Set Camera’s IP Adress
confirm or enter the camera’s IP Address.
Click .OK
Start acquiring images.
Continuous Grab
On the QuickCam toolbar, click the
icon. The image should
be visible in the Image Output window.
8
9
Note: Refer to the following sections for details on equipment recommendations and camera
connector information.