User`s manual

Spyder 3 GigE User’s Manual
DALSA 03-032-10158-09
29
2.5 Camera LED
The camera is equipped with a red/green LED used to display the operational status of
the camera. The table below summarizes the operating states of the camera and the
corresponding LED states.
When more than one condition is active, the LED indicates the condition with the highest
priority. Error and warning states are accompanied by corresponding messages further
describing the current camera status.
Table 6: Diagnostic LED
Priority Color of Status LED Meaning
1 Flashing Red Fatal Error. For example, camera temperature is too
high and camera thermal shutdown has occurred.
2 Flashing Green Camera initialization or executing a long command
(e.g., flat field correction commands ccp or ccf)
3 Solid Green Camera is operational and functioning correctly
2.6 Camera Timing
Table 7: Camera Link Timing Parameter Table
Units Min. Typ. Max. Notes
tLine_Period μs 27.78 1000 1K 1 Tap
14.71 1000 1K 2 Tap
54.1 1000 2K 1 Tap
27.78 1000 2K 2 Tap
twSync ns 100
twSYNC_INT ns 100
(3000*)
For exposure mode
4 this value needs to
be >3000ns other
wise >100ns