User`s manual

Spyder 3 GigE User’s Manual
DALSA 03-032-10158-09
35
Figure 15: Command Tab after Sending the sem (Set Exposure Mode) Command
Configuration Window Method:
1. Open QuickCam. Refer to section 246H3.1 QuickCam Interface for details on installing and
running the application.
In the Camera Configuration Window:
2. Open the Exposure/GPIO tab.
3. Click Advanced…
4. Open the Port Communication tab.
The Port Communication tab provides an ASCII interface. In order to comply with
DALSA camera command protocol, you must send and receive as ASCII and ensure that
the CR checkbox is checked (default).
Figure 16: Port Communication Tab after Sending the h (Help) Command