User`s manual

Spyder 3 GigE User Manual
03-032-10158-09 DALSA
6
1.1 Camera Highlights
Features
• Broadband responsivity up to 408±16DN(nJ/cm
2
) @10dB gain
• 1024 or 2048 pixels, 14µm x 14µm pixel pitch, 100% fill factor
• High or low speed (40 or 80MHz)
• Up to 68KHz line rates
• Dynamic range up to 1400 : 1
• Data transmission up to 100m
• ±50µm x, y sensor alignment
• RoHS and CE compliant
Programmability
• Easy to use graphical user interface.
• Serial interface (ASCII, 9600 baud, adjustable to 19200, 57600, 115200), through virtual
serial port through Ethernet.
• Programmable gain, offset, exposure time and line rate, trigger mode, test pattern
output, and camera diagnostics.
• Tall pixel, high sensitivity, or low sensitivity mode available.
• Flat-field correction—minimizes lens vignetting, non-uniform lighting, and sensor
FPN and PRNU.
Description
The Spyder 3 GigE camera is DALSA’s first GigE camera. With a GigE interface, you no
longer need a frame grabber which means significant system cost savings.
The Spyder 3 GigE is also DALSA’s first dual line scan camera. When operating in high
sensitivity (dual line scan) mode, the Spyder 3 GigE camera has 3x the responsivity of a
DALSA’s Spyder2 line scan camera.
Applications
The Spyder 3 GigE camera is particularly suited for the following applications:
• FPD inspection
• Pick and place
• Container inspection