User`s manual

Spyder 3 GigE User’s Manual
DALSA 03-032-10158-09
63
Setting the Line Rate
Purpose: Sets the camera’s line rate in Hz. Camera must be operating in
exposure mode 2 or 7.
Syntax:
ssf f
Syntax Elements:
i
Desired line rate in Hz. Allowable values are:
1k 1 tap:
300-36000 Hz
1k 2 tap:
300-68000 Hz
2k 1 tap:
300-18500 Hz
2k 2 tap:
300-36000 Hz
Notes:
• To read the current line frequency, use the command 28Hgcp or
29Hget ssf.
• If you enter an invalid line rate frequency, an error message is
returned.
Related Commands:
30Hsem, 31Hset
Example:
ssf 10000
Setting the Exposure Time
Purpose: Sets the camera’s exposure time is µs. Camera must be operating in
mode 2, 6, or 8.
Syntax:
set f
Syntax Elements:
i
Desired exposure time in µs. Allowable range is 3 to 3300µs.*
Notes:
• To read the current line frequency, use the command 32Hgcp or
33Hget set.
• If you enter an invalid line rate frequency, an error message is
returned.
• *The exposure time range is based on the current line rate.
• To determine the maximum exposure time allowed for the
current line rate, use the command
get ger.
Related Commands:
34Hsem, 35Hssf
Example:
set 400.5
i
Applies to Modes 2 and
7
i
Applies to Modes 2 and
8