User`s manual

Spyder 3 GigE User’s Manual
DALSA 03-032-10158-09
65
Setting the GPIO Input Signal
Purpose: Sets the signal type for the selected input.
Syntax:
sgi i i
Syntax Elements:
i
Input to set.
0 = Input 0, Pin 1 (TTL) or 1 and 2 (LVDS)
1 = Input 1, Pin 3 (TTL) or 3 and 4 (LVDS)
2 = Input 2, Pin 6 (TTL) or 6 and 7 (LVDS)
3 = Input 3, Pin 8 (TTL)
i
Signal type.
0 = Disabled
1 = TTL
2 = LVDS
Notes:
• To read the current configuration, use the command 39Hdgc or
40Hget sgi i where i is the input signal.
• If you enter an invalid configuration, an error message is
returned.
Related Commands:
41Hsgo
Example:
sgi 3 1
sgs p i
p
i
sgs 0 0