User`s manual

Spyder 3 GigE User Manual
03-032-10158-09 DALSA
96
Syntax Parameters Description
get spc
x
Returns the PRNU coefficient for the specified pixel
number.
x=pixel number within the range 1 to sensor pixel
count
.
get ssb
t
Returns the current background subtract value.
t = Tap value. 0 for all taps or 1 to 2 for individual tap
selection depending on camera model.
get ssf
Returns the current line/frame rate in Hz.
get ssg
t
Returns the current digital gain setting.
t = tap selection, either 1 to 2 depending on camera
model, or
0 for all taps
get ssm
Returns the current sensitivity mode where:
0 = Low sensitivity mode
1 = High sensitivity mode
2 = Tall pixel mode
get sut
Returns the current upper threshold value.
get svm
Returns the current video mode.
0: Normal video mode
1: Test pattern
2: Test pattern
get ugr
t
Returns the gain reference value.
t = tap selection, either 1 to 2 depending on camera
model, or
0 for all taps
get vt
Returns the camera’s internal chip temperature in degrees
Celsius.
get vv
Returns the camera’s supply voltage.
get wfc
Returns whether FPN coefficients have been saved.
0 = No FPN coefficients saved
1 = Pixel coefficients have been saved
get wpc
Returns whether PRNU coefficients have been saved.
0 = No PRNU coefficients saved
1 = Pixel coefficients have been saved
get wus
Returns whether user settings have been saved.
0 = No user settings saved
1 = User settings have been saved