Use and Care Manual
TILE
CARE &
MAINTENANCE
CARE & MAINTENANCE PAGE 7 OF 7
STONE MOSAIC (continued)
On walls, kitchen counters or vanity tops, a spray bottle can be used to apply the cleaning solution. Allow sitting for manufacturer’s
specied amount of time (usually 3 to 5 minutes). Agitate with a sponge, synthetic mop, soft bristle brush or through the use of a
oor scrubbing machine. Mop up dirty solution and buff dry.
Once the stone has been cleaned, you can periodically apply a spray-buff wax-type oor nish to enhance the beauty and
luster of polished stone. Apply the nish with a spray applicator and buff immediately with a white nylon pad.
Pre-Grout Sealing
A non-sanded grout is strongly recommended for Natural Stone installations due to the narrow grout joints customarily
preferred. All travertine, slate, tumbled stone and honed/amed/unpolished granite should be sealed prior to the grouting
process to protect them from staining. The application of a good quality sealer should be used as a grout sealer and applied
again as the nal sealing process once the installation is nished.
Metal Tile
To clean, use a liquid non-abrasive household cleaner.
DO NOT use scouring pads, steel wool, sandpaper or other abrasive products. Avoid cleaners containing ammonia, bleach,
abrasives, or other hazardous/polluting compounds. Always test in a small inconspicuous area while using a new cleaner to
ensure compatibility.