Specification Sheet

NATURAL STONE
STONE Á LA MOD
DECORATIVE
7834 C. F. Hawn Freeway,
Dallas, Texas 75217 | 1.800.933.TILE
To view the complete collection of
Daltile
®
products and information,
visit our website at daltile.com.
DESIGNED TO HELP EARN LEED™
CREDITS. For more detailed information,
visit daltilegreenworks.com. ©2017 Daltile (4/17)
SIZES
Thickness
Sq. Ft./
Carton
Pieces/
Carton
2" x 3"
Wedge Polished
(12" x 13-3/8")
(30.50 cm x 34.00 cm)
3/8" 4.80 5
5-3/4" x 1/2"
Linear Polished
(12" x 12")
(30.50 cm x 30.50 cm)
3/8" 5.00 5
1-1/2" x 3/4"
Oval Polished
(11-3/4" x 12")
(30.00 cm x 30.50 cm)
3/8" 4.90 5
1/2" x 1/2"
Mosaic Polished
(12" x 12")
(30.50 cm x 30.50 cm)
3/8" 5.00 5
1-1/2" x 3/4"
Basketweave Honed
n
(12" x 12")
(30.50 cm x 30.50 cm)
3/8" 5.00 5
2" High-Low Random
Polished and Honed
n
(11-3/8" x 11-3/8")
(29.0 cm x 29.0 cm)
1/4"-1/2"
-3/8"
4.55 5
3/8" Random Brick-joint
Split Face
n
(11" x 11")
(28.00 cm x 28.00 cm)
3/8" 4.20 5
3/4" x 3/4" High-Low
Split Face
n
(12" x 12")
(30.50 cm x 30.50 cm)
1/4"-1/2" 5.00 5
Block Random Blend
Polished
(12" x 12")
(30.50 cm x 30.50 cm)
3/8" 5.00 5
n
No grout joint is recommended. Not recommended for wet areas.
All Stone á la Mod products are mesh-mounted.
INSTALLATION
Grout Joint Recommendation Shade Variation
1/16"
High (V3)
NOTES
Natural stone products inherently lack uniformity and are subject
to variation in aesthetics (color, shade, finish, etc.) and performance
(hardness, strength, slip resistance, etc.). Natural stone products do
not meet minimum coefficient of friction thresholds recommended
by safety standard setting organizations. Check local building codes
prior to specification or installation to verify that product technical
characteristics comply with required parameters. Final selection
should be made from actual tiles and trim, and not from tile and trim
samples or color reproductions. Manufactured in accordance with
ANSI A137.1 standards.
The existence and dimensions of a bevel may vary from lot to lot. Be
sure to request a sample of the specific lot you are planning to order,
if the bevel is an important feature of your job.
For additional application and technical information, refer to the
“Stone Usage Guide” at daltile.com/sug.
APPLICATIONS
Target
DCOF wet
Suitable
Dry & Level – Interior Floor N/A
Wet & Level – Interior Floor ≥ 0.42
Shower Floors (Residential or Light Commercial) ≥ 0.42
Exterior Floor Applications
(including pool decking & other
wet areas with minimal footwear)
≥ 0.60
Ramps & Inclines ≥ 0.65
Walls/Backsplashes N/A
Countertops N/A
Pool Linings N/A
A DCOF value of ≥ 0.42 is the standard for tiles specified for level interior spaces
expected to be walked upon when wet, as stated in ANSI A137.1-2012, Section 9.6.
UPTOWN BLEND M314
Block Random – Polished