Use and Care Manual
finish may change the appearance and performance of 
your stone, so always test a small area first. Application 
of topical sealer or wax should never be done 
as an attempt to add a shine to a honed, 
scratched or non-polished stone product. 
This will only create maintenance and/or slip 
resistance problem.
SALTILLO 
SALTILLO TILE - ROUTINE CARE
Soft clay tiles are categorized as specialty use products, 
and as such they are generally not governed by the 
same requirements as glazed or unglazed ceramic tile. 
These products will require some type of topical sealer 
protection. These sealers are designed to provide stain 
resistance and a durable finish to protect clay tile against 
wear. Pre-sealing the tile prior to grouting will act as a 
pre-grout sealer, provided it is applied over a clean tile 
surface. An additional final coat over the grouted floor will 
complete the sealing process along with providing the final 
grout stain protection.
There are two common types of sealers used today for 
sealing specialty tiles. The first is a water-based blend 
of acrylic polymers. This product allows for moisture 
vapor transmission, and it can be reapplied over itself, 
without stripping or removing the old sealer when the 
original application has become worn. The second type 
is a solvent-based sealer. Solvent-based sealers are not 
as forgiving after they have become worn, they must be 
stripped and removed prior to reapplication. Both types 
should be UV stable, which means the ultra violet rays 
from the sun should not break them down. You should 
always follow the manufacturer’s instructions for use, 
maintenance and precautions.
The expected wear of the topical sealer will vary 
depending on the hardness, surface texture, type or 
area, usage, and type of maintenance products used. 
However, the average expected use life of the sealer, 
when properly prepared, is a maximum of 3 years. Harsh 
cleaning methods, high-alkaline or solvent-based cleaners 
can significantly lower the expected life of the sealer. 
Concentrated tile cleaners are recommended for routine 
cleaning.
Maintenance Cleaning:
Highly alkaline, acidic, ammoniated, abrasive cleaners and/
or bleach may break down the sealer, adversely aecting 
repellency and may not be good for the tile or grout. Use 
neutral cleaners specially formulated for tile and grout that are low 
VOC, non-hazardous and non-polluting.
For routine cleaning:
We recommend DuPont™ StoneTech
®
 Professional Stone & Tile 
Cleaner.
• Mix 2 ounces of Stone & Tile Cleaner concentrate in 1 gallon of 
 warm or hot water. (Note: One gallon of concentrate makes 64 
 gallons of cleaning solution.
• Apply mixed solution with a damp mop, sponge or appropriate 
 professional cleaning equipment.
• Clean entire area with mop, changing mop water often to ensure 
 that soil is not re-deposited. Wipe or rinse cleaned area.
• Let area dry completely before using.
You may also use DuPont™ StoneTech
®
 Professional Stone & 
Tile Cleaner in the ready-to-use spray bottle or wipes.
Re-Sealing and Protecting:
For interior surfaces, resealing should be performed every 3-5 
years. For exterior surfaces, resealing should be performed 
every 1-3 years. Terrazzo surfaces must be sealed to prevent or 
minimize staining. Leaving terrazzo untreated may greatly hinder the 
complete removal of stains in the future. We recommend the use 
of a heavy-duty sealant that is low in VOC content and does not 
contain any hazardous materials.
ONE QUARTZ SURFACES 
ONE QUARTZ SURFACES - ROUTINE CARE
• One Quartz Surfaces are virtually maintenance free and can be 
 cleaned with extreme ease.
• Common household spills – such as, tea, coee, lemon juice, soda, 
 fruit, vegetable juice, olive oil or grease spills – are easily removed 
 and the surface restored to its original appearance.
• Some One Quartz Surface colors and nishes liked honed, matt, 
 etc., are more sensitive to grease or nger-prints and may require 
 extra care during routine cleaning.
• Quartz is one of the hardest materials in nature, which is your 
 assurance that your One Quartz Surfaces will not easily scratch 
 or chip. The use of a cutting board is nevertheless recommended.
• To maintain the natural beauty of One Quartz Surfaces, do not 
 place hot skillets or roasting pans directly onto the surface but use 
 a trivet instead.





