Specification Sheet

SIZES
Thickness
Sq. Ft.
per Carton
Pieces per
C a rto n
24 x 24
Field Tile
(Unpolish ed &
Polished )
(23-7/16" x 23-7/16")
(59.44 cm x 59.44 cm )
3/8" 15.28 4
12 x 24
Field Tile
(Unpolish ed ,
Polished &
Textu red)
(11-1/ 2 " x 23-7/16")
(29.56 cm x 59.44 cm )
3/8" 15.28 8
12 x 12
Field Tile
(Unpolish ed &
Polished )
(11-1/ 2 " x 11-1/ 2 ")
(29.56 cm x 29.56 cm )
3/8" 10 .23 11
12 x 12
Modern Liner
(Com bination of
surfaces)
(11-1/ 2 " x 11-1/ 2 ") Sheet
(29.56 cm x 29.56 cm
Sheet)
3/8" -- 11
IN STA LLATIO N
G rout Joint Recom m endation Shade Variation
1/ 8 " (3/16" when multiple sizes are installed
in a modular pattern, and when installed
in a stag g ered brick-joint pattern; overlap
sho uld not exceed 33% )
Medium (V2)
TEST RESULTS
ASTM# Result
Water Absorption C373 < 0.5%
Breaking Strength C648 > 450 lbs
Scratch Hardness M O H S 8.0
Chem ical Resistan ce C 6 50 R esistant
NOTES
Manufacturer Advisory (P O L ISHED ONLY): These tiles have a
dynam ic coefficient of friction <0.42 as measured by th e DCOF
Acutest method. Tiles with DCOF values <0.42 are not
recom m ended for use in areas with wet or slippery cond itions.
For more information, see ANSI stan d ard A137.1 section 6.2.2.1.10 ,
available at www.
tileusa.co m .
Special consideration needs to be given when installing tiles
greater th a n 15 inches. Please refer to daltile.com /LargeTiles
fo r more information.
Special care sho uld be ta ke n when grouting with dark pigm ented
colors. A grout release is recom m ended to prevent finely pow dered
pigm ents
from lodging in th e pores of th e surface. Use of a latex
modified th in-set is recom m ended fo r installation.
Since th e re are variations in all fired ceram ic products, tile and
trim supplied fo r your particular installation may not match th e se
sam p les. Final color selection sh o uld be
made from actual tiles and
trim and not from tile sam p les or color reproductions. Manufactured
in accordance with ANSI A137.1 sta n d ards.
Water, oil, grease, etc. create slippery cond itions. Floor applications
with exposure to these conditions require extra caution in product
selection. Not fo r
use on ram ps.
For additional information refer to “Factors to Consider” at
daltile.com /Factors.
FLOOR APPLICATIO N S
Targ et
DCOF wet
Suita b le
Dry & Level – Interior N /A
Wet & Level – Interior 0.42 *
Exterior Applications;
Pool Decking & Other Wet Areas
with Minimal Footw ear
0.60
**
Ram ps & Inclines 0.65
A DCOF value of 0.42 is th e stand a rd for tiles specified for level interior sp aces
expected to be walked upon when wet, as stated in ANSI A137.1- 2 0 12 , Section 9.6. For
more information about DCOF and th e DCOF AcuTest™, visit daltile.com /D C O F.
OTHER A P P L IC A T IO N S
Suita b le
Walls/B acksp lashes
Countertops
Pool Linings
APPLICATION NOTES:
* Unpolish ed and te x tu red su rfaces only
** Textu red su rface only
Polished surface is suita b le only for dry and level floor applications.
Suita b le for exterior applications in freezing and non-freezing climates when proper
installation m ethods are fo llow ed.
TRIM
Type N um ber Size
Pieces per
Carton
Bullnose
(Unpolish ed and
Polished )
S-43C9S 3 x 12 3 0
Cove Base S-36C9TA 6 x 12 2 0
Cove Base
Outcorner
SC-36C9TA 1 x 610
Bullnose, cove base, and cove base corner trim are intended to
coo rdinate with floor field tile in th e stan d a rd 90-degree installation
position.
7834 C. F. Hawn Freew ay,
Dallas, Texas 75217 | 1.800.933.TILE
To view th e com p lete collection of
Daltile
®
products and inform ation,
visit our website at daltile.co m .
DESIGNED TO HELP EA RN LEED ™
CRED ITS. For more detailed inform ation,
visit daltilegreenw orks.com . ©2016 Dal-T ile Corporation (8 / 16 )
SCAN QR CO DE
FO R PRO DUCT
INFORMATION
Get a QR Code
re a d e r at:
GET.DALTILE.CO M