Installation Guide

ManualsBrandsDaltile ManualsFlooringPremier Accents Caviar Penny Round 10 in. x 11 in. x 6 mm Glass Mosaic Tile

Photo features Restore™

Black Marble 2 in. x 2 in. Mosaic Tile

Installation of

MOSAIC TILE

INSTALLATION INSTRUCTIONS | MOSAIC TILE | PAGE 1 OF 6

CONTINUED ON NEXT PAGE

REQUIRED TOOLS STEP 1: SURFACE PREPARATION

• Tile may be installed over most

structurally sound substrates.

• First, you will need to clean the

surface that you plan to tile, ensuring

that the area is smooth, dry, and free

of wax, soap scum, and grease.

• Any damaged, loose or uneven areas

must be repaired, patched and leveled.

• You must make sure to remove any

items that may interfere with

installation such as moldings, trim,

electrical covers, and appliances.

¨ Chalk Line

¨ Tape Measure

¨ Tile Cutter (if cutting is necessary)

¨ Tile Spacers

¨ Mixing Paddle

¨ Notched Trowel

¨ 5-Gallon Bucket

¨ Rubber Mallet

¨ Rubber Grout Float

¨ Sponge

Summary of content (6 pages)

PAGE 1
Installation of MOSAIC TILE REQUIRED TOOLS ¨ Chalk Line ¨ Tape Measure ¨ Tile Cutter (if cutting is necessary) ¨ Tile Spacers ¨ Mixing Paddle ¨ Notched Trowel ¨ 5-Gallon Bucket ¨ Rubber Mallet Photo features Restore™ Black Marble 2 in. x 2 in. Mosaic Tile 1 STEP 1: SURFACE PREPARATION • Tile may be installed over most structurally sound substrates. • First, you will need to clean the surface that you plan to tile, ensuring that the area is smooth, dry, and free of wax, soap scum, and grease.
PAGE 2
Installation of MOSAIC TILE 2 STEP 2: WALL LAYOUT • Start by measuring the square footage of the wall you are planning to tile, making sure to take into account any switches and outlets. • Find the center point of the wall, using a level to draw a plumb line in the wall’s center. Photo features Restore™ Black Marble 2 in. x 2 in. Mosaic Tile 3 STEP 3: CUTTING • It is recommended to use a diamond blade, as blades designed for ceramic tile will chip the stone and or glass.
PAGE 3
Installation of MOSAIC TILE 4 STEP 4: DRILLING • If drilling a hole in the tile is necessary, it is recommended to use a drill bit that is specially designed for glass, metal and stone. NOTE: The tile must be securely clamped into place to prevent movement of the tile during the drilling process. • When drilling the hole, keep the bit and hole lubricated to prevent chipping. • Drill from both sides of the tile, starting with the back and drilling half of the depth of the tile.
PAGE 4
Installation of MOSAIC TILE 6 STEP 6: GROUTING NOTE: If you are installing a natural stone mosaic, please make sure to seal the mosaic before and after grouting. You can reference Step 8 for more information on proper sealants. • Using the instruction on the package, make enough grout to use in about 30 minutes. • Remove tile spacers and spread grout on the tile surface, forcing it down into the joints with a rubber grout float or squeegee.
PAGE 5
Installation of MOSAIC TILE 8 Photo features Restore™ Black Marble 2 in. x 2 in. Mosaic Tile STEP 8: SEALING (STONE TILE ONLY) • Penetrating/impregnating stone sealers are a no-sheen, natural-look sealer that can be water-based or solvent-based. • A premium, natural-look, penetrating impregnating sealer is the best choice when you are wanting to maintain the natural color of the stone. A stone enhancer sealer is often used when a darker, enriched, or highlighted character is desired.
PAGE 6
Installation of MOSAIC TILE A Photo features Restore™ Black Marble 2 in. x 2 in. Mosaic Tile GLOSSARY OF TERMS B LEGAL Back-butter is the spreading of a bond coat to the back of a tile before placing the tile to ensure a strong bond with the thin-set mortar. Balanced cuts are perimeter tile cuts of equal size that are installed on opposite sides of the working area or on either side of a miter.