Sales Sheet
SIZES
Thickness
Sq. Ft./
Carton
Pieces/
Carton
24 x 24
Floor Tile
(23-7/16" x 23-7/16")
(59.44 cm x 59.44 cm)
5/16" 15.20 4
12 x 24
Floor Tile
(11-5/8" x 23-7/16")
(29.56 cm x 59.44 cm)
5/16" 17.01 9
12 x 12
Floor Tile
(11-5/8" x 11-5/8")
(29.56 cm x 29.56 cm)
5/16" 12.22 13
8" Hexagon
Floor Tile
(7-7/8" x 9-1/8")
(20.04 cm x 23.16 cm)
5/16" 9.37 25
8" Hexagon
Decorative
Accent
(7-7/8" x 9-1/8")
(20.04 cm x 23.16 cm)
5/16" 9.37 25
12 x 24
Flat Wall Tile
(11-3/4" x 23-3/4")
(29.90 cm x 60.42 cm)
3/8" 15.52 8
12 x 24
Wave Wall Tile
(11-3/4" x 23-3/4")
(29.90 cm x 60.42 cm)
3/8" 15.52 8
12 x 24
Multi-Geometric
Wall Tile
(11-3/4" x 23-3/4")
(29.90 cm x 60.42 cm)
3/8" 15.52 8
4 x 12
Wall Tile
(4-1/4" x 12-7/8")
(10.91 cm x 32.77 cm)
5/16" 10.64 28
1-1/2" Hexagon
Mosaic
(Dot-mounted)
(11-3/8" x 10-1/4" Sheet)
(28.89 cm x 26.04 cm Sheet)
1/4" 9.72 12
Available in Polished and Matte finishes only.
Available in Matte finish only.
Available in PT20, PT21, PT22 and PT23 only. Available in Satin finish only.
Pressed tile, does not feature TruEdge
™
Technology.
7834 C.F. Hawn Freeway,
Dallas, Texas 75217 | 1.800.933.TILE
To view the complete collection of
Daltile
®
products and information,
visit our website at daltile.com. ©2021 Daltile (7/21)
APPLICATIONS
Target
DCOF wet
Suitable
Dry & Level – Interior Floor N/A
†
Wet & Level – Interior Floor ≥ 0.42
†
*
Shower Floors (Residential or Light Commercial) ≥ 0.42
**
Exterior Floor Applications
(including patios, pool decking & other
wet areas with minimal footwear)
≥ 0.60
Ramps & Inclines ≥ 0.65
Walls/Backsplashes N/A
Countertops N/A
†
Pool Linings N /A **
A DCOF value of ≥0.42 is the standard for tiles specified for level interior spaces
expected to be walked upon when wet, as stated in ANSI A137.1-A326.3. For more
information about DCOF and the DCOF AcuTest
™
, visit daltile.com/DCOF.
APPLICATION NOTES:
Floor tile suitable for exterior applications (provided it is noted as suitable in the
applications chart above) in freezing and non-freezing climates, when proper installation
methods are followed.
Wall and mosaic tile suitable for exterior applications (provided it is noted as suitable in
the applications chart above) in non-freezing climates, when proper installation methods
are followed.
†
Floor and Mosaic tile only. * Matte finish only. ** Mosaic tile only.
INSTALLATION
Grout Joint Recommendation Shade Variation
Floor: 1/8" (3/16" when multiple sizes are installed in
a modular pattern, and/or when installing tile with
a length 15" or greater in a staggered brick-joint
pattern; overlap should not exceed 33%.)
12 x 24 Wall: 1/16" (1/8" when rectangular size is
installed in a staggered brick-joint pattern;
overlap should not exceed 33%.)
4 x 12 Wall: 1/16" (When rectangular size is installed
in a staggered brick-joint pattern, overlap should not
exceed 33%.)
Mosaic: 1/8"
Random (V4)
PERFORMANCE CHARACTERISTICS
ASTM#
Floor
Result
Wall
Result
Mosaic
Result
Water Absorption C373 < 0.5% < 20.0% < 3.0%
Breaking Strength C648 > 275 lbs 120-230 lbs > 250 lbs
Scratch Hardness MOHS
8.0 (Matte)
6.0 (Polished)
4.0 - 6.0 8.0
Chemical Resistance C650 Resistant Resistant Resistant
For additional information on test results, visit us at:
daltile.com/information/TestResults.
NOTES
Since there are variations in all fired ceramic and natural products, tile
and trim supplied for your particular installation may not match samples.
Final confirmation should be made from actual tiles and trim prior to
installation. Manufactured in accordance with ANSI A137.1 standards.
Not for use on ramps. Water, oil, grease, improper drainage and certain
footwear can create slippery conditions. Floor applications expected to be
exposed to these conditions require extra caution in product selection.
For additional information refer to “Factors to Consider” at:
daltile.com/Factors.
Random visuals enhance the natural beauty of this product. To achieve
optimal results, all tile should be selected from multiple cartons and
shading and graphic arrangement planned prior to installation.
Special consideration needs to be given when installing tiles greater than
15 inches. Please refer to daltile.com/LargeTiles for more information.
Manufacturer Advisory: All tile is measured by the DCOF AcuTest™ method.
Tiles with DCOF values <0.42 are not recommended for use in areas with
wet or slippery conditions. For more information, see ANSI standard A137.1
section 6.2.2.1.10, available at www.tileusa.com.
Special care should be taken when grouting with dark pigmented colors.
A grout release is recommended to prevent finely powdered pigments
from lodging in the pores of the surface. Use of a latex modified thin-set is
recommended for installation.
TRIM
Type Number Size Pieces/Carton
Floor Bullnose P43F9 3 x 24 10
Jolly
S1/212J 1/2 x 12 12
Available in PT20, PT21, PT22 and PT23 only. Available in Satin finish only.
POST-CONSUMER
RECYCLED MATERIALS
PRE-CONSUMER
RECYCLED MATERIALS
MADE IN THE U.S.A. REVEAL IMAGING
®
All or select items within this series meet the requirements for these qualifications.
For more information, visit daltile.com.
DURABILITY
Floor Surface Wear Resistance
1 Residential Bathrooms 3 All Residential / Light Commercial
2 All Residential Areas 4 All Residential / Commercial
MARBLE LOOK
PERPETUO
™
COLORBODY
™
AND GLAZED PORCELAIN FLOOR &
GLAZED CERAMIC WALL TILE AND MOSAIC