User's Manual

Doc. No.
Rev.
Date
DRAFT
1.01
2012-01-27
Damm Cellular Systems A/S, Denmark
TetraFlex
®
7.5 Manual - Software installation
TetraFlex® 7.5 Manual 2-46
2.4 SOFTWARE INSTALLATION
All software is preinstalled from factory on the CF Storage media in the SB421 or BSC412.
This includes also the BS421, TR412, Power supply- and combiner software.
The next chapter is covering the re-installing or updating of software on these units. Also
installation of relevant software on external PC is covered.
Please also read the relevant release notes and upgrade guides.
2.4.1 CF Storage media
The TetraFlex
®
system uses an 8GB Compact Flash (CF) Card as storage media
The CF card is divided in to 3 partitions
8GB CF Card – Order no. 105126* (V7.30 and forth)
Partition No.
Name
Usage
1 (2 Gbyte)
CF-P1
(C:drive)
Primary partition (system) -TetraFlex
®
and operation
system
2 (2 Gbyte)
CF-P2
(D:drive)
Secondary partition for Upgrade TetraFlex
®
and
operation system
3 (4 Gbyte)
CF-P3
(E:drive)
Log Server database files
*Please inform about sw version when ordering a new flash card.
On previous versions (Pre Ver.7.x) a build in hard disk was installed having the drive letter F:
Apart from the standard Windows Operation System (OS) directories, the CF card contains
the directory “c:\Tetra” where the primary Tetra functionality is stored