User's Manual

Doc. No.
Rev.
Date
DRAFT
1.01
2012-01-27
Damm Cellular Systems A/S, Denmark
TetraFlex
®
7.5 Manual - Software installation
TetraFlex® 7.5 Manual 2-50
o Copy “…\Pgm\BSC\BSC.exe” into the active folder in the BSC “C:\Tetra\Active\”.
o Restart the BSC.
o Repeat the above two points for all BSC’s in the system.
2. If the system is installed with older TetraFlex releases please follow the Update guideline
for ver.7.4 to 7.5
3. If the installation is done on a new XP/ Windows installation, the following files should be
executed (If not already there the files could temporary be placed in the following path
“C:\Tetra\Active\pgm\BSC”):
o XpQosSetup.reg
o WinPcap_4_0_1.exe
o Restart the BSC via start menu “BSC Restart” or execute BSC.vbs and select
RESTART
4. If the installation is done on a PC with Windows 7, the following files should be executed
(If not already there the files could temporary be placed in the following path
“C:\Tetra\Active\pgm\BSC”):
o vbs-runas.reg (to allow BSC and BSC-GUI to run as administrator)
o XpQosSetup.reg
o WinPcap_4_0_1.exe
o Restart the BSC via start menu “BSC Restart” or excecute BSC.vbs and select
RESTART
In the “C:\Tetra\Active\” you will find a number of directories beside the pgm directory -
mentioned above-, these directories contain: system configuration files, the subscriber
database, and sound files to be used as part of the Tetra core features.
If a specific audio file doesn’t exist it is copied to the disk, when the service starts. User
generated sound files (in the C:\Tetra\Active\Audio folder) with different names as the
standards are kept.
Authentication keys need to be re-imported from the security key file from where they
originally were imported (and a renew of all keys must be performed).
2.4.4.2 Start Menu
The various TetraFlex parts can be started from the Windows start menu if the
C:\Tetra\Active\StartMenu\TetraFlex folder with all its content is copied to C:\Documents and
Settings\All Users\Start Menu.
2.4.4.3 OM
Stop the OM program - when running - before proceeding.
1. If the system is installed with TetraFlex release 7.5:
o Copy all files from “…\Pgm\OM\” into the active folder: “C:\Tetra\Active\PGM\OM”.
o Repeat this for all nodes in the system.