User's Manual

Doc. No.
Rev.
Date
DRAFT
1.01
2012-01-27
Damm Cellular Systems A/S, Denmark
TetraFlex
®
7.5 Manual - Log Server
TetraFlex® 7.5 Manual 2-98
Dongle Configuration Values
Name
Description
Dongle serial number
DAMM serial number of the dongle programming.
Dongle Date Limit
The date the dongle will cease to operate
Application Date Limit
If the application date (date compiled in the software) is
newer than the Application date limit the application will no
longer start. This means that it is not possible to upgrade
the software with a newer one as the application date limit.
CDR and MS location
logging
CDR and Voice logging allowed or not allowed. MS
registration and RSSI measurement allowed or not allowed
SDS Content Log
Logging of SDS content allowed or not. This is also the
case GPS coordinate logging.
Max. number of concurrent
voice logging channels
Number of simultaneous voice channels which can be
logged at a given time (0-255)
2.10.3 Configuration
The TetraFlex
®
Log Server’s configuration is located in an ini file within the same folder as
the executable one. The configuration is loaded during start up by the LogServer Service.
The LogServer keeps the configuration in memory, it can be changed on the fly via the
LogServer Tray user interface without restarting. When the LogServer service is running it
owns the .ini file and changes in the configuration should always be made via the
LogServerTray, since the LogServer service will overwrite the ini file if it detects any
configuration differences.
LogServer Tray: