User's Manual

Doc. No.
Rev.
Date
DRAFT
1.01
2012-01-27
Damm Cellular Systems A/S, Denmark
TetraFlex
®
7.5 Manual - Log Server
TetraFlex® 7.5 Manual 2-105
7. Create Tetra user
Create the user 'tetra' with the password 'tetra'.
The 'Local Security Policy' setting: 'Password must meet complexity requirements'
must be disabled, to allow the short 'tetra' password.
Find the setting here:
Open "Start->Administrative tools->Local Security Policy" window
In left pane: 'Security Settings->Account Policies->Password Policy'
To the right disable: 'Password must meet complexity requirements'
The 'tetra' user must have "Administrator rights".
8. Copy Tetra programs
The Log Server programs can be downloaded from www.damm.dk extranet by downloading
the latest Tetraflex 7.5x version. Please read the release notes before installing.
9. Install the Log Server
Ensure that the IP settings are correct for LAN and WAN connectors. You should be able to
get ping responses from the BSCs on the LAN segment. It might be necessary to add a
persistent route, this is done by executing the following in a command shell:
route add 172.16.0.0 mask 255.255.0.0 172.16.0.1 -p
Insert License dongle, and wait till Windows has installed windows drivers.
Run "Start->All Programs->TetraFLex->LogServer->LogServer Install"
This will create the Tetra folder structure and copy the Log Server files and finally install the
service.
Run the "LogServer Restart" shortcut. If running "LogServer Restart" for the first time a
"User Account Control" dialog pops up with the following message:
"Do you want to allow the following program to make changes to this computer?"
Click the "Change when these notifications appear" link. In the new dialog set the slider
control to "Never notify". Click OK, and Yes till all warning dialogs are closed.
The machine needs to be restarted before this new setting takes effect. Restart the machine
and start the LogServer service using the "LogServer Restart" shortcut.
The "LogServer Restart" shortcut also starts the service and sets the LogServer startup type
to "Automatic (Delayed start)".