User's Manual

Doc. No.
Rev.
Date
DRAFT
1.01
2012-01-27
Damm Cellular Systems A/S, Denmark
TetraFlex
®
7.5 Manual - Dongle Configuration
TetraFlex® 7.5 Manual 2-41
2.3.1.5 Spare part Dongle:
o A Spare Part Dongle will be offered at a nominal price. If used in the node containing
the master subscriber register, the dongle can only be used as spare dongle if the
original dongle has no encryption key programmed. In case that encryption key is
present, the replacement dongle must be ordered from DAMM sales.
o An order for Spare Part Dongles shall follow the Administrative procedure for
ordering.
o A Spare Part Dongle is programmed with all settings at “zero”.
o When needed, the Partner must inform DAMM about the serial number of the faulty /
missing dongle and DAMM will send a mail with a file containing the System and
Node license’s settings from the original dongle.
o An invoice will be issued with the value of the System and Node licenses in the
dongle, which will be credited when the original dongle is received by DAMM
2.3.1.6 Dongle exchange and information of content
At startup the BSC.exe is checking if a dongle is present, and if missing, the BSC will not
start.
To view the preprogrammed BSC settings in the dongle, the following TetraOM commands
may be used:
S04 Shows the license settings of the dongle for the BSC:
Figure 2-2: Dongle Readout