User's Manual

Doc. No.
Rev.
Date
DRAFT
1.01
2012-01-27
Damm Cellular Systems A/S, Denmark
TetraFlex
®
7.5 Manual - Software installation
TetraFlex® 7.5 Manual 2-52
If you are allowed to restart the BSC you may place the Dispatcher files in
c:\tetra\update\pgm\dispatcher\ They will then be copied to the right directory when activating
“BSC BackupUpdateRestart”
Having any unwanted files in any of the above mentioned folders (e.g. from older
installations) please delete them before copying the new Dispatcher installation files.
2.4.4.6 Log Server
The Log Server is available either as an external Log Server or installed on the 8GByte
Compact Flash card. The Log Server requires at least 1GB RAM to operate properly. The
log server is as default stopped and need to be restarted when needed.
To upgrade an existing Log Server to release 7.5 the Log Server must be stopped, all files
and folders from C: \Tetra\Active\Pgm\LogServer\ and C: \Tetra\Active\Pgm\LogClient\ must
be copied to the unit where the Log Server is installed. The Log Server can then be restarted
using the start menu TetraFlex → LogServer Restart. The Log Server is now running and the
Log Client installation files are ready for distribution via the "TetraFlex" share
C:\Tetra\Share\LogClient\
Note: The database for ver. 7.5 is not compatible with earlier versions. When restarting - the
new log server is making a copy of the old database - and it is starting with a new empty
database. The old database is stored in a folder with ver. no and date like:
\TetraFlexLogDB_4_0_20110912_103145
If you want to use the subscriber information in the Logserver from you ver. 7.4 database it
can be copied from the ver. 7.4 to ver 7.5 database following this procedure:
a. Stop the Log Server and MySql server service
b. Copy the following files from the old database to the new:
i. MsLogConfig.myd
ii. MsLogConfig.myi
iii. MsLogConfig.frm
c. Start the MySql server service and the Log Server again.
If using a database older than ver. 7.4 you have to contact DAMM for converting the
subscriber data.
2.4.4.7 Log Client
The Log Client applications may be installed on an external PC work station with the
appropriate dongle.
Install the Log Client by connecting to the Log Server (on SB421, BSC412 or external
logserver) with the file explorer. Find the folder Log Client using the TetraFlex share
(C:\Tetra\share\LogClient) and execute the LogClientInstall.vbs. When the Log Client shortcut
is executed, the new and the old LogClient.exe are compared. If they differ a backup of the
old Log Client files will be made and all the Log Client files are copied from the Log Server to
the local machine, except for the LogClient.ini file. If they are equal the local Log Client files
will be executed without copying.