User's Manual

Doc. No.
Rev.
Date
1.00
2011-12-08
Damm Cellular Systems A/S, Denmark
TETRAFLEX
®
V7.5 MANUAL - General system description
TetraFlex® 7.5 Manual 3-2
3.1 GENERAL SYSTEM DESCRIPTION
3.1.1 TetraFlex V7.5 General System description
For complete system description, refer to ref.1: “TetraFlex v7.5 System description.pdf
3.1.2 Site versus Node:
Until the DAMM TetraFlex
®
system software was introduced we have used the word “Site” to
indicate how many radio sites there were in a system. There was coherency between number
of “Sites” and number of “Radio sites”.
The DAMM TetraFlex
®
concept opens for “Sites” meaning the actual geographical position of
the equipment and a NODE meaning any unit running a BSC.exe application (except for the
redundant BSC).
A node could be a radio node, GW node or a combination of these.
3.1.3 Software packages:
All DAMM TetraFlex
®
system software packages with all Functions and Applications are
available on http://www.damm.dk/ restricted area in encrypted form for a period of minimum
18 months after Release Date
o All Software Releases consist of:
o Software package with Software Release number.
o Release Note.
o Commercial Note.
o A software package can be de-encrypted by means of any valid DAMM dongle.
o If a new Software Release contains bug fixes, which have a serious effect on the
operation of a system, the Application Date can be set to an earlier date, and
thereby allow execution on systems, where the dongle Application Date Limit has
expired. DAMM Support Department is responsible for keeping the www.damm.dk
restricted area updated
o Software packages with a Release Date older than 18 months shall be removed
from www.damm.dk
3.1.3.1 Software packages execution or update:
The dongle controls which software release and which part of the release that can be
executed on the BSC4XX or PC in which the dongle is inserted.
The customer may decide to execute the total package or only some of the files in the
package.