User's Manual

Doc. No.
Rev.
Date
1.00
2011-12-08
Damm Cellular Systems A/S, Denmark
TETRAFLEX
®
V7.5 MANUAL - Base Station Controller
TetraFlex® 7.5 Manual 3-5
The BSC-GUI can be started from the TetraFlex Start menu or the Taskbar. The GUI can
only operate on the BSC.exe that is running on the same node.
The GUI has 7 tabs (8 for the BS41x version):
Status: (se figure 3-1) gives an overview of the status of the BSC, TR (Transceivers) and PS
(Power Supply’s). It is possible to clear alarm, access the OM command system, Activate
BSC and BS (Only BS41x), Restart and Stop the BSC, and Update of software and Restore
and Backup of software and settings. These are functions also available in Network
Management.
Console: The Console window is updated at each BSC start-up, and shows the start-up
status of the system. The window is dynamic and will be updated when the status of the BSC
changes e.g. from active to inactive
The Clear Button deletes the actual content of the console window.