User's Manual

Doc. No.
Rev.
Date
1.00
2011-12-08
Damm Cellular Systems A/S, Denmark
TETRAFLEX
®
V7.5 MANUAL - Base Station Controller
TetraFlex® 7.5 Manual 3-6
MAIN: From the Main window the fundamental parameters for the BSC can be set and
displayed. The corresponding OM command to Main starts with M (e.g. M00). The settings
are stored in c:\tetra\active\data\CnfgMain.txt
The LAN and WAN address can be selected from the actual IP setting in Windows and the
input of GPS data can be enabled and disabled (yes /no). If GPS is enabled the GPS