User's Manual

Doc. No.
Rev.
Date
1.00
2011-12-08
Damm Cellular Systems A/S, Denmark
TETRAFLEX
®
V7.5 MANUAL - Base Station Controller
TetraFlex® 7.5 Manual 3-7
coordinates are shown in the Latitude and Longitude fields. If it is disabled the coordinates
can be set manually.
BSS: From the BSS window most of the SwMI parameters can be set and displayed. The
corresponding OM commands to BSS starts with S (e.g. S00). The settings are stored in
c:\tetra\active\data\CnfgBss.txt.
The corresponding parameters can be set in NM so please find the explanation for the
various parameters in the chapter covering NM –BSC list.