User's Manual

Doc. No.
Rev.
Date
1.00
2011-12-08
Damm Cellular Systems A/S, Denmark
TETRAFLEX
®
V7.5 MANUAL - Network Management
TetraFlex® 7.5 Manual 3-19
3.3.4.6 BSC list
Figure 3-16: BSC List
A number of information regarding the node may be chosen by the tabs in the top of the
window. Information that are not grayed out may be reconfigured by selecting the appropriate
fields using right or left mouse button.
This setting allows seeing and changing the BSC that is not active e.g. Redundant
BSC
A green LED indicates a running BSC with no alarm and a BSC without a LED is
not active (e.g. Redundant BSC).
A red LED indicates an alarm condition
3.3.4.6.1 Alarms
Indicates whether there is an active alarm present on a node and which component(s) the
alarms applies to. The alarm can be Acknowledged and Unacknowledged by right clicking on
the field.
3.3.4.6.2 Status
Right mouse click on the node description of a specific node allows a change of the node
description.
Status selection also shows information’s regarding:
o HW type
o Software Version
o Dongle date limit
o Activation time
o Number of nodes
o Numbers of Log servers
o Last msg. – Last messages received date and time