User's Manual
Doc. No.
Rev.
Date
1.00
2011-12-08
Damm Cellular Systems A/S, Denmark
TETRAFLEX
®
V7.5 MANUAL - Network Management
TetraFlex® 7.5
Manual
3-26
3.3.4.6.9 Carrier Numbers
o Auto – Auto convert primitives and frequencies – “Yes” the freq. and carrier number
go together – “No” the freq. and carrier number can be set independent of each
other.
By right click on TRxx carrier number the TR Frequency Configuration window comes up:
o Spare – Preferred to set to Normal TR operation or TR Hot spare witch in case of a
TR fault will switch to the spare TR (with the same Freq. settings)
o RX frequency – Receive Frequency setting *
o TX frequency – Transmit Frequency setting *
o CarrNo – Carrier Number Allows configuration of the carrier number on the node.
The carrier number is related to the frequency band selected in the radio
configuration menu. E.g. FreqBand: 400Mhz and Carrier number: 800 gives Tx freq.
= 420,00 Mhz (800x25khz+400Mhz= 420Mhz)
o Band - Base frequency band
o Offset - Frequency offset (default 0 kHz)
o DuplSpace - Duplex spacing (default 10 Mhz)
o Rev – No: Definition of standard (TX highest) or Yes: Reverse ( TX lowest)
operation