User's Manual

Doc. No.
Rev.
Date
1.00
2011-12-08
Damm Cellular Systems A/S, Denmark
TETRAFLEX
®
V7.5 MANUAL - Network Management
TetraFlex® 7.5
Manual
3-28
Max.
Priority
The following is information only:
Status
Status of GW functions. By right mouse click you
can also acknowledge and unacknowledge alarms
Call
Number of present calls
Idle
Number of free GW
Block
Number of blocked GW
The drop down box “Active GWs” / “All nodes” changes between display of active nodes only,
or both active and not active nodes. See also section 2.11 Voice Gateway for Voice Gateway
configuration.
3.3.4.6.12 SIP Setup
This setup describes the configuration needed to setup the system for SIP operation
The PABX samples are shown for the Innovaphone IP800, but may be any SIP compatible
device. Please consult the user manual and technical staff for the device in question.
The TetraFlex system needs at least one Voice Gateway configured on any node available to
operate with a PABX.
Figure 3-17: OM command S13 - Voice Gateway Status