User's Manual

Doc. No.
Rev.
Date
DRAFT
1.01
2012-01-27
Damm Cellular Systems A/S, Denmark
TetraFlex
®
7.5 Manual - BS41x Configuration
TetraFlex® 7.5 Manual 2-80
2.7.5 Add a Transceiver
A new TR412 Transceiver can be inserted “live” into the Rack. If already configured in the
BSC, the TR412 will automatically start-up. Before removing a TR412 it should be blocked
and the TX stopped.
The settings can be set and changed from the BSC GUI or with OM commands. Both are
described in this chapter.
The BSC-GUI can be started from the Start menu – TetraFlex – BSC - BSCGUI :
The Transceivers can be added and deleted from the BSC tab. OM command
F75 - to view configured TR’s
F75/nn/ ADD - To add new transceiver, where nn reflects the TR position 11 to 18
All TR412’s should be configured in the BSC.
The current TR configuration can be displayed from the BSC-TR and BS tab and OM
command:
05 - Display Config /Status from BSC
13 - Display TX output power selection
22 - Display RX diversity selection
30 - Display RX-TX channel numbers
72- Display RX settings
2.7.6 TX Power