User's Manual

Doc. No.
Rev.
Date
DRAFT
1.01
2012-01-27
Damm Cellular Systems A/S, Denmark
TetraFlex
®
7.5 Manual - BS41x Configuration
TetraFlex® 7.5 Manual 2-81
Setting the desired TX power level for all TR41x use the BSC-GUI, BS-Tab select the TX
rack output power:
The setting is Tetra Mode output power at Rack TX Antenna connector. An insertion loss of
the combiner system of 4.0dB is assumed. If the value is lower or higher than the TR412
limits, the TR412 will set the power to the minimum or maximum power respectively.
If set to Disabled (Controlled by TR412) the output is set to 0
Ant. conn. Tetra Power
TR412 Power
Standard TR412
+26.0dBm to +40.0dBm
1.0W to 25.0W
High power TR412
+30.0dBm to +44.0dBm
2.5W to 62.5W
OM Command:
H73/TXPWR/+nn.n -Change TX output power (at Rack TX connector)
nn.n: Output power (26.0..44.0 [dBm]), 00.0: Disabled (controlled of TR412 setting)