User's Manual

Doc. No.
Rev.
Date
DRAFT
1.01
2012-01-27
Damm Cellular Systems A/S, Denmark
TetraFlex
®
7.5 Manual - Network Management Installation
TetraFlex® 7.5 Manual 2-88
2.8 NETWORK MANAGEMENT INSTALLATION
2.8.1 The DAMM Network management Application
The Network Management software (NM) is preinstalled on every SB421/ BS41x delivered
with TetraFlex
®
and need no installation to run.
NM may be executed on any node from a remote desktop connection to the node or with a
keyboard/mouse and display connected direct to a SB421 or a BSC412.
You can also use a PC which has an IP connection to the infrastructure. The NM is able to
listen to the multicast which means, when using a PC the PC must be connected to the LAN.
Figure 2-21: Network management main screen
2.8.2 NM Installation on an external PC
o If not already done, copy the Tetra directory from a BSC to the NM PC
o Execute the NM.vbs file. This will copy the NM program to the user profile and start
up the NM application
o Create a shortcut on the desktop to the NM.vbs file
Refer to section 3.3.2 for NM User Manual