User's Manual

Doc. No.
Rev.
Date
DRAFT
1.01
2012-01-27
Damm Cellular Systems A/S, Denmark
TetraFlex
®
7.5 Manual - Network Management Installation
TetraFlex® 7.5 Manual 2-90
 Start Windows SNMP Service.
SNMPInstall.reg
Registry file containing registry settings necessary to install the SNMP
extension dll. The settings in this file will be imported by the
SNMP_Install.vbs file.
NM.exe
Network Management application. NM is regularly updating the BSC
variables, so that the extension agent is able to service the SNMP
request with the latest info.
Network
Management.lnk
Shortcut to the NM.bat file located under C:\Tetra\Active\Pgm\NM.
DAMM-
GLOBALMIB.
Mib
Damm MIB tree
2.8.3.1 SNMP installation
To install the SNMP agent on the SB421 or BSC412 complete the following steps:
1. Copy “DAMM-GLOBAL-MIB.mib” into the documentation folder of the BSC
“C:\Tetra\Active\Doc\”.
2. Copy SNMPAgent.dll, SNMP_install.vbs, SNMPInstall.reg, NM.exe and Network
Management.lnk to the SNMP gateway node. The files should be placed in
C:\Tetra\Active\Pgm\NM.
3. Run the SNMP_install.vbs file to install the SNMP extension dll and registry settings.
4. Start-up the Network Management application (NM). NM should be set to auto start to
start-up automatically when the computer is restarted. The SNMP gateway will not
operate without the NM.
2.8.3.2 SNMP Manually PC installation
If the Damm SNMP agent is to be installed on a PC instead of a SB421 or BSC412, you will
have to install the agent manually. To manually install the Damm SNMP agent do the
following:
1. Make sure the Windows SNMP Service is installed on the PC. It can be installed via:
“Control Panel” – “Add or remove programs” – “Add/Remove Windows components” –
“Management and monitoring tools” – “Simple Network Management Protocol”.
2. Copy SNMPAgent.dll, NM.exe and Network Management.lnk to the PC. The files
should be placed at C:\Tetra\Active\Pgm\NM.
3. Copy the SNMPAgent.dll, and rename the copy “SNMPAgent_.dll”.
4. Install the SNMPAgent_.dll by entering the following settings into the registry:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\SNMP\Parameters\Extensi
onAgents]
"TetraFlexSNMP"="SOFTWARE\\SNMP\\CurrentVersion"
[HKEY_LOCAL_MACHINE\SOFTWARE\SNMP\CurrentVersion]
"Pathname"="C:\\Tetra\\Active\\Pgm\\NM\\SNMPAgent_.dll"
5. Make the PC login automatically upon boot, by entering the following settings into the
registry (exchange DefaultUserName and DefaultPassword with the correct username
and password):