User's Manual

Doc. No.
Rev.
Date
DRAFT
1.01
2012-01-27
Damm Cellular Systems A/S, Denmark
TetraFlex
®
7.5 Manual - Network Management Installation
TetraFlex® 7.5 Manual 2-91
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon]
"AutoAdminLogon"="1"
"DefaultUserName"="tetra"
"DefaultPassword"="tetra"
6. Place the Network Management.lnk file in the startup folder to make the Network
Management application startup automatically upon boot..
7. Check the SNMP Security settings (start -> right click on ”my computer” -> manage ->
Services and Applications -> Services -> SNMP Service -> Properties -> Security).
These settings could be as shown in the example on the following figure:
A more safe solution is to restrict the SNMP access by ticking ”Accept SNMP packets
from the hosts” and add the Host name, IP or IPX address of the specific known hosts.
8. Restart the Windows SNMP Service.
9. Start the Network Management application. NM should be set to auto start-up to make
it start-up automatically when the computer is restarted. The SNMP gateway will not
work without the NM.
2.8.3.3 SNMP MIB Tree