User's Manual

Doc. No.
Rev.
Date
DRAFT
1.01
2012-01-27
Damm Cellular Systems A/S, Denmark
TetraFlex
®
7.5 Manual - Network Management Installation
TetraFlex® 7.5 Manual 2-92
A SNMP Management Application uses the information in the DAMM-GLOBAL-MIB.MIB file
for configuration and setup, please refer to the user guide for your SNMP Management
Application to set it up.
SNMP gateway has been tested to work with WatchUp Gold 14.2
The following figure is a graphical representation of the DAMM-GLOBAL-MIB module (The
Damm MIB tree).
Figure 22: The DAMM-GLOBAL-MODULE
The most important variables are explained in detail in the following table.
Name
OID
Description
dammRoot
1.3.6.1.4.1.15228
The root of the Damm MIB tree.
dammGlobalModule
dammRoot.1.1.1
Contains info on when the MIB file was
updated. This is not a scalar variable,
which means the data is located in the mib
file and isn’t polled from the BSC.
dammBscTable
dammRoot.3.1.1.2
Contains a dammBscEntry for each BSC
running in the system.
dammBscEntry
dammRoot.3.1.1.2.1
Contains each variable in a given BSC,
which is going to be monitored.