User's Manual

Doc. No.
Rev.
Date
DRAFT
1.01
2012-01-27
Damm Cellular Systems A/S, Denmark
TetraFlex
®
7.5 Manual - Dispatcher Installation
TetraFlex® 7.5 Manual 2-95
The share looks like this seen from an external PC:
\\< IP address or node name >\TetraFlex\Dispatcher
< IP address or node name > is either the IP address or the DNS name of the node where
youo install the Dispatcher from and where the Application Gateway is defined.
When the setup.exe program is executed this dialog comes up:
The dispatcher can be installed as default; this means that the dispatcher is installed in
the directory c:\tetra\applications\dispatcher\default and the user number and PIN code has
to be setup in dispatcher after the installation.
If using “Install dispatcher for user number” the user Application SSI number and PIN code
that has been setup in the subscriber register must be typed in, in this case the Dispatcher is
installed in the directory:
c:\tetra\applications\dispatcher\<user number> where the “user number” is the number you
typed.
The installation process makes a shortcut to the dispatcher in the start menu on your PC:
“Tetraflex – Dispatcher 7.52 2011-10-14 – Default” where “date” is the date you made the
installation followed by “Default” or the user number if the user number was used for the
installation.
Please see also chapter 3 “Dispatcher” for setting up the dispatcher.
2.9.3 Dispatcher Installation on a PC with Windows 7
If problems occur with finding the node from where the dispatcher shall be installed, this
setting in Windows 7 can help:
 click the start button and type secpol.msc in the search function.