User's Manual

Doc. No.
Rev.
Date
DRAFT
1.01
2012-01-27
Damm Cellular Systems A/S, Denmark
TetraFlex
®
7.5 Manual - Dispatcher Installation
TetraFlex® 7.5 Manual 2-96
 Browse to "Local Policies" -> "Security Options". Now look for the entry "Network
Security: LAN Manager authentication level" and open it. Click on the dropdown menu
and select "Send LM & NTLM - use NTLMv2 session security if negotiated". Apply the
settings.
 In the Advanced sharing settings page of Network and sharing center, you need to set
it as Work/Home profile. How to do it:
 -Enable network discovery
-Turn on file and print sharing
-Turn off password protected sharing
-Use user accounts and passwords to connect to other computers
2.9.4 Configurations to be done on the node
The Application gateway must be enabled on the node where the Dispatcher has to be
connected to, and the Application SSI must be defined in the subscriber register.
This can be done from the Network Manage (please see the relevant chapter in Network
manager).
The following OM command can also be used to check the settings:
o M71 to verify the correct IP address of the BSC WAN.
o S75 and S75/CNFG/+ to check and enable the application gateway in the BSC.